SAM
®
RF Operations Manual 18
Section 2: Installing the SAM RF System
© SAFLOK WL 12/19/2007
Installing the SAM RF Software for Client/Remote Stations (continued)
17. The browser window will display
the SAM RF System database
files.
Click on SRS_DAT.SAM, and
then click Open.
Clicking on the file will display the Initialization
screen, or SAM RF System main menu. Like
most Windows-based programs, pull-down
menus appear in the upper left area of the
screen, and only those features that are active
and accessible will be highlighted.
Until you log on to the SAM RF System, only the
File menu will be active. All other features of the
system will be inaccessible.
The installation and configuration of the remote
SAM RF System is complete. Click File and
then Logon to proceed to the Logon screen.
Remove the SAM RF System software CD from
the CD-ROM drive on your PC. Retain the CD in
a safe place in case software reinstallation is
necessary.
Skip ahead to Section 2.5 to install the USB drivers.
To Next Page
Loading...