Kaba Saflok SAM RF - Page 9

SAM
®
RF Operations Manual 7
Section 1: Introduction
© SAFLOK WL 12/19/2007
Quick Reference Guide (continued)
Making an Inhibit Resident Key
1. At the main SAM RF screen, click Keys.
2. Click Create.
3. Click Inhibit Resident Key.
4. Select the Unit Number.
5. Select the ID(s) to inhibit.
6. Check the button to the right of The Key is Assigned To.
7. Select Staff or Resident and click OK.
8. At the Staff or Resident List screen, highlight the name of the person you want to assign the key to
and click Select.
9. The screen will return to the Create Inhibit Resident screen. Insert key into the encoder and click OK.
When the key is encoded, the screen will display “The write operation was successful.”
10. Click OK and Cancel to return to the main screen.
11. This key will need to be used in the unit and common area lock(s) it was assigned to in order to
invalidate the lost key.
Adding a New Resident
1. At the main SAM RF screen, click Maintenance.
2. Click Residents.
3. Highlight the Unit Number and click Add.
4. At the Resident Form screen, type the last name, first name, middle initial, phone number(s), and any
additional notes, then click Save.
5. At the Unit Resident List screen, click Close.
Making Limited Use Keys
1. At the main SAM RF screen, click Keys.
2. Click Create.
3. Click Limited Use Key.
4. Check the box next to the Unit Lock(s) you want the key to open.
5. Check the box next to the Common Access Lock(s) you want the key to open.
6. If you are only selecting one unit and want the key to only open the door once, check the box next to
One Shot Key.
7. Set the Valid Date.
8. Set the Expiration Time.
9. Click the button to the right of The Key Is Assigned To.
10. Select the Staff, Resident, or Vendor option and click OK
.
11. Highlight the name of the Staff, Resident, or Vendor and click Select.
12. Insert the key into the encoder.
13. Click OK. When the key is encoded, the screen will display “The write operation was successful.”
14. Click OK and Cancel to return to the main screen.