SAM
®
RF Operations Manual 93
Section 5: Keys
© SAFLOK WL 12/20/2007
Creating Master Keys (continued)
5. The default settings for master keys
assign each key for a full 24 hours
each day with no expiration date.
You may leave the settings if they
meet your requirements. However, if
you wish to limit the number of hours
per day the key will provide access or
assign an expiration date, you can do
so now. To assign operational times
– during the time a new hire is on
probation, for example – adjust the start and stop hours on the PC dialog box. To assign an expiration
date, click the open box next to Key Expires. A Date field will appear beneath these words. Enter the
desired key expiration date in the Date field.
6. Now, you must name the person to whom you wish to assign the key in the box under the words,
“The Key Is Assigned To.” Click the button to the right of the box. (This button has a hand pointing to
the right.) This will display the Select User Type PC dialog box.
Note: Master keys can only be assigned to staff members.
7. Click the open circle next to Staff and click OK.
8. At the Staff List PC dialog box, any staff
members you previously entered into the
system will be listed in this box. Simply
click on the name of the person to receive
this key and click Select.
To Next Page
Loading...