SIGMA FLUID
FG-460 FG-680
Approval USDA H-1, NSF
Approved for the manufacture of
food packaging, meat and poultry
processing and other food process‐
ing applications.
USDA H-1, NSF
Approved for the manufacture of food
packaging, meat and poultry processing
and other food processing applications.
Viscosity at 40 °C
50.7 mm
2
/s
(D 445; ASTM test)
70.0 mm
2
/s
(D 445; ASTM test)
Viscosity at
100 °C
8.2 mm
2
/s
(D 445; ASTM test)
10.4 mm
2
/s
(D 445; ASTM test)
Flash point 245 °C
(D 92; ASTM test)
245 °C
(D 92; ASTM test)
Density at 15 °C — —
Pour point — —
Demulsibility at
54 °C
— —
Tab. 15 Cooling oil recommendation (food processing)
Cooling oils for the operation with snow cannons
SIGMA FLUID
PANOLIN HLP SYNTH 46
Description Saturated synthetic ester with additives (mineral oil free).
Easily biologically degradable as per OECD criteria.
Application Specifically designed for machines intended for the operation with snow
cannons.
Approval —
Viscosity at 40 °C
47 mm
2
/s
Viscosity at
100 °C
8.1 mm
2
/s
Flash point >210 °C
Density at 15 °C 0.92 g/ml
Pour point –35 °C
Demulsibility at 54 °C —
Tab. 16 Cooling oil recommendation (machines for snow cannons)
2.10 Cooling oil charge quantity
The cooling oil charge quantity depends on the optional heat recovery system. For machines with
options W2 or W3, the volume required additionally for the heat recovery must be added to the
charge.
2 Technical Specifications
2.10 Cooling oil charge quantity
901824 12 E
Operating Manual Screw Compressor
ASK
9
To Next Page
Loading...
Need help?
General
