Characteristic SIGMA FLUID
Oil grade S–460 MOL
Classification Silicone-free,
synthetic oil
Mineral oil
Application Standard oil for all applications except in
connection with foodstuffs.
Particularly suitable for machines with a
high duty cycle.
Standard oil for all applications
except in connection with food‐
stuffs.
Particularly suitable for machines
with a low duty cycle.
Approval — —
Viscosity at 40 °C
45 mm
2
/s
(D 445; ASTM test)
44 mm
2
/s
(DIN 51562–1)
Viscosity at
100 °C
7.2 mm
2
/s
(D 445; ASTM test)
6.8 mm
2
/s
(DIN 51562–1)
Flash point 238 °C
(D 92; ASTM test)
220 °C
(ISO 2592)
Density at 15 °C
864 kg/m
3
(ISO 12185)
–
Pour point -46 °C
(D 97; ASTM test)
-33 °C
(ISO 3016)
Demulsibility at 54 °C 40/40/0/10 min
(D 1401; ASTM test)
–
Tab. 27 Cooling oil recommendation
2.5.6 Cooling oil charge
Fluid volume Value
Total charge [litres] 9,0
Tab. 28 Cooling oil charge
2.6 Engine
2.6.1 Engine data
Feature Specification
Make/Model Kubota V1505–T-iDi
Rated engine power [kW] 30,6
Speed under full load [rpm] 2800
Idling speed [rpm] 2200
Type of fuel Diesel *
Fuel consumption under load [l/h] 8,0
Oil consumption related to fuel consumption [%] approx. 0,2
2 Technical Specification
2.6 Engine
10
Service Manual Screw Compressor
M43 No.: 9_9432 02 E
To Next Page
Loading...
