KAESER M43 - Operating the Battery Isolating Switch; Fig. 19 Battery Isolating Switch

2. Close the «compressed air outlet valves» on the air distributor.
The engine runs in
IDLE and the turbo charger can cool down.
3. Turn the «starter switch» 12
to the “0” position after 2-3 minutes.
4.
Turn the «Controller ON» switch 11
to the “0” position.
Close and lock the canopy.
8.2 Option oa
Operating the battery isolating switch
Fig. 19 Battery isolating switch
1 «Battery isolating switch»
I – on
0 – off
Start the machine
➤
Switch the «battery isolating switch» on.
The battery is now connected to the machine's electrical system. The machine can now be
started.
Shutting down the machine
➤ Switch the «battery isolating switch» to the 'off' position
The battery is disconnected from the machine's electrical system.
8 Operation
8.2 Operating the battery isolating switch
No.: 9_9432 02 E
Service Manual Screw Compressor
M43
57
RAMIRENT