KanexPro MX-HDBASE8X8-4K - Page 25

4K HDBaseT™ 8x8 Matrix Switcher
MX-HDBASE8X8-4K 20
KanexPro.com
Command
Function
Feedback Example
/%[Y]/[X]:[Z].
HDCP management command.
[Y] is for input(value: I) or output (value:
O); [X] is the number of the port, if the
value of X is ALL, it means all ports; [Z] is
for HDCP compliant status, the value may
be 1 (HDCP compliant) or 0 (not HDCP
compliant).
/%[Y]/[X]:[Z].
[x1]R[x2].
Transfer the IR signal from output
channel [x1] to input channel [x2].
IR:X1->X2
(X1/X2=1~8)
DigitAudioON[
x].
Enable HDMI audio output of port x.
! X=1, 2, 3, 4, 5, 6, 7, 8, enable this
port.
! X=9, enable all the 8 ports.
DigitAudio ON with [x]
x=1~8 or ALL
DigitAudioOF
F[x].
Disable HDMI audio output of port x.
! X=1, 2, 3, 4, 5, 6, 7, 8, disable this
port.
! X=9, disable all the 8 ports.
DigitAudio OFF with
[x]
x=1~8 or ALL