B-12 SCAN EXAM
B. Installation and setup
Click Save to save any adjustments.
Click Reset to reset the image adjustment to
the factory settings.
B.3.4 Workfl ow page
Readout start
Select Automatic if you want the scanner to
start
automatically.
The Start after: options allows you to select
when the scanner will start:
- after Plate insert: the scanner will
automatically start when it detects an
imaging plate in the plate carrier.
- after Cover removal: after the imaging
plate in protective cover have been
inserted into the plate carrier, the unit will
automatically start when the protective
cover is removed.
To Next Page
Loading...
