SCAN EXAM B-13
B. Installation and setup
The Start delay: option allows the start
delay time to be selected.
- Short = approximately 0.2 seconds
- Medium = approximately 0.4 seconds
- Long = approximately 0.6 seconds
Select Manual if you want the unit to start
reading
an IP only when the device START key is
pressed.
Plate eject mode
The options are:
- Drop in plate collector: the IP is ejected
into the plate collector after the IP has
been scanned.
- Leave in plate carrier: the IP remains
in the plate carrier after the IP has been
scanned. The Leave in plate carrier option
is recommended for users who want to
handle the IPs with more care and reduce
wear and tear on them. This option
extends IP service life and allows greater
hygiene standards to be observed.
To Next Page
Loading...
Need help?
General
