SCAN EXAM B-15
B. Installation and setup
Beep when entering standby mode
Select this and audible signal will be heard
when the scanner enters the standby mode.
Shutdown after (minutes)
Allows you to select the length of time the
scanner will remain unused before the unit
automatically switches itself off.
B.3.6 Hygiene page
Automatic UV disinfection
The internal ultraviolet (UV) light allow you to
disinfect the plate carrier when it is inside the
scanner.
Disinfection frequency: There are three
options:
- During idle and shutdown: UV
disinfection is automatically performed
when the unit is in the idle mode and
before shutdown. There is no user
indication of this taking place.
To Next Page
Loading...
