KaVo uniQa - Automatic Cleaning Programmes: Post-Programme Actions; Programme Start Confirmation Steps; Post-Exposure Phase Water Bottle Actions

Care instructions KaVo uniQa
2 Reprocessing steps in accordance with ISO 17664 | 2.9 Automatic cleaning programmes
42 / 56
4 Subsequently, the "Continue" button is shown. Press the "Continue" button
to start the cleaning programme.
4 After completion of the exposure phase, remove the remaining water from
the water bottle.
4 Refill the water bottle with water and standard OXYGENAL 6 concentration.
Also refer to:
3.3 Replenishing OXYGENAL 6 when using the water bottle,Page52
The display shows the following message: