It should take approximately 6 hours to fully recharge the battery from a completely
discharged state.
To maximize battery life, keep the unit plugged in when the patient is not mobile for
significant periods.
Battery Charging Instructions (cont.)
2
1
3
4
Plug the AC Power Cord into the DC Power Supply “Brick”.
Plug the AC Wall Plug into an AC wall outlet.
Locate the “Arrow” on the ActiV.A.C. Charging Cord Connector.
With ActiV.A.C. Touch Screen User Interface facing up, the “Arrow” should also be up as the
Charging Cord Connector is plugged into the Power Connection on the ActiV.A.C. Therapy
Unit.
®
®
®
The battery level is shown on the bottom of the Touch Screen User Interface.
When the ActiV.A.C. Therapy Unit is correctly plugged into the ActiV.A.C. Power Supply, the
will glow as the battery is charging.
When the battery has reached full charge the will glow
® ®
Battery Charging Indicator Light Amber
Battery Charging Indicator Light Green.
Battery Charging Indicator Light
Battery Level Indicator
Fully
Charged
Battery
Critical
Battery
Low
(Charge battery soon)
(Charge battery
)immediately
In
Use
Steps are numbered in order. See picture on previous page.
13
®
A
c
t
I
To Next Page
Loading...
