3
2
Start with the empty case.
Open the Center Zipper and Access Flap.
Continue to slide the unit into the case
until it fits.
Hold the case open, and with a canister attached
and the Touch Screen User Interface facing down,
slide the ActiV.A.C. Therapy Unit into the case.
®
After the ActiV.A.C. Therapy Unit is completely in the
case, fold the Access Flap over the therapy unit.
®
Inserting the Therapy Unit into the Carrying Case
5
Close the Center Zipper.
6
Wrap any excess tubing into a bundle. Put the tubing
into the Tubing Storage Pocket on the bottom of the
Carrying Case. Ensure there are no kinks or the tubing
is not pinched as it is put in the Tubing Storage Pocket.
7
Close Tubing Storage Pocket Zipper.
8
Finished position with zippers and flaps closed.
4
Excess tubing may present a tripping hazard. Ensure that excess tubing is
stored in the tubing pocket and is out of areas where people may walk.
1
20
®
A
c
t
I
To Next Page
Loading...
