General description
Karl E. Brinkmann GmbH 27
Detail of front panel C6 ECON
detail of LED of rear panel
The activity of the UPS can be controlled via the module of the oper-
ating system(WindowsXP
®
) backup energy source -> energy sav-
ings options in the control panel. With this module, you can check
the state of battery charge, enable/disable and programme the inter-
vention time of the UPS.
If the UPS is removed or not used for a long period of time, you will
need to charge it completely (this takes about 1.5 hours) by connect-
ing the module to an C6 ECON operating system.
LED power on
LED
Power/UPS
To Next Page
Loading...
