User's manual – C6 ECON
38 Karl E. Brinkmann GmbH
In the configuration panel, it is possible to programme the interven-
tion time of the UPS.
The minimum time that can be selected is 2 minutes. This means
that if the line power supply is not restored within this time, the oper-
ating system will run the programme specified in the box below (if in-
serted) and will then proceed with system shutdown.
Calibration
It is
advisable to calibrate the UPS yearly during scheduled machine
maintenance, so that the system is updated to the actual battery
status. This will increase reliability of the UPS system.
The entire operation is carried out automatically by means of special
calibration software.
• select the file UPS_Console.EXE and copy it in a previously
created folder on your CF or (HD) and run it
To Next Page
Loading...
Need help?
General
