General description
Karl E. Brinkmann GmbH 37
• From the window, select “ Backup energy source”
• From the window, select “ Select”.
• From the list "Select manufacturer", select ASEM S.p.A.. From
the list "Select Model" select the model OT1200 UPS. The item
selected in the field “Port” (default COM1) does not make any dif-
ference since it is not used for this purpose.
• Press the End button.
The system must now:
• Activate communications with the UPS.
• Signal presence of UPS active (details box).
• Provide estimated capacity of group. (status box)
To Next Page
Loading...
