KEB combivert R6-S Applications Manual

Page 3.2 - 4 COMBIVERT R6-S © KEB, 2008-02
Operating and appliance data
3.2.2 Overview of the In parameters
In parameter groups contain dataandinformationfortheidenticationofthehardwareandsoftwareaswellas
forthetypeandnumberofoccurrederrors.Followingparametersareavailable:
In.00 inverter type
In.01 DC rated current
In.06 software version
In.07 software date
In.10 serial no. (date)
In.11 serial no. (count)
In.12 serial no. (AB high)
In.13 serial no. (AB low)
In.14 customer no. (high)
In.15 customer no. (low)
In.16 QS no.
In.22 user parameter 1
In.23 user parameter 2
In.24 last error
In.25 error diagnosis
In.26 E.OC error counter
In.27 E.OL error counter
In.28 E.OP error counter
In.29 E.OH error counter
In.30 E.OHI error counter
3.2.3 Overview of the SY parameters
TheSYparametergroupcontainssystem-specicparameters.Followingparametersareavailable:
SY.02 inverteridentier
SY.03 power unit code
SY.06 inverter address
SY.07 baud rate ext. bus / PC
SY.09 HSP5 watchdog time
SY.11 baud rate int. bus
SY.32 scope timer
SY.41 control word high
SY.42 status word high
SY.43 control word long
SY.44 status word long
SY.50 control word low
SY.51 status word low
SY.56 start display address

KEB combivert R6-S Specifications

General

Brand	KEB
Model	combivert R6-S
Category	Power Supply
Language	English