Keba ServoOne CM-P BG1 User Manual

2
Operation Manual Supply Unit SO CM-P BG1+2
ID no.: 1400.201B.5-00 Date: 02/2020
Overview of supply unit SO CM-P BG1+2
Supply unit SO CM-P BG1 Supply unit SO CM-P BG2
SOCM-P.0010 (wall mounting)
SOCM-P.0110 (cold plate)
SOCM-P.0022 (wall mounting)
SOCM-P.0122 (cold plate)
Operation Manual Supply Unit SO CM-P BG1+2
Compact multi-axis system ServoOne CM
ID no.: 1400.201B.5-00
Date: 02/2020
Firmware version: V1.1
The German version is the original of this documentation.
Compact multi-axis system ServoOne CM
Consisting of the supply unit SO CM-P, the DC-powered axis controllers SO CM and a
matching controller MotionOne CM,
the SystemOneCM compact multi-axis system offers a high degree of solutions exper-
tise and exibility in the range from 2 A to 210 A rated current.
With the aid of the expansion module SO CM-E, the axis controllers SO CM BG1+2 can
be combined with the axis controllers SO CM BG3+4 without problems. The addition of
the capacitance module SOCM-C to the supply unit SO CM-P BG3+4 makes possible
usage in even more dynamic applications. The external switched-mode power supply
SOCM-S is also available for the 24 V control supply.
Reduction of the wiring and shortening of the installation times are just as easy to
achieve as resource-saving, cost-conscious operation.
Subject to technical change without notice
The content of our documentation was compiled with the greatest care and attention,
and based on the latest information available to us.
We should nevertheless point out that this document cannot always be updated simul-
taneously with the ongoing technical development of our products.
Information and specications may be subject to change at any time. For information on
the latest version, please visit www.keba-lti.com.

Keba ServoOne CM-P BG1 Specifications

General

Brand	Keba
Model	ServoOne CM-P BG1
Category	Power Supply
Language	English