Keba ServoOne CM-P BG1 User Manual

7
General
Operation Manual Supply Unit SO CM-P BG1+2
ID no.: 1400.201B.5-00 Date: 02/2020
General
Position of rating plate
You will nd the rating plate (T) on the left side of the device.
T
T1
Figure 1.2 Position of rating plate (T)
Figure 1.3 Position of second rating plate
(T1)
A second rating plate (T1) with only the most important information is on the top of
the busbar cover. In this way the rating plate data can also be seen if the devices are
installed in a row.
1.8 Brief description
NOTE
Only the ServoOne CM-P supply units are described in this Operation Manual.
You will nd information on the safety control (SafetyOne SCM), controller
(MotionOne CM) and axis controller (ServoOne CM) in the related operation
manuals.
1.7 Rating plate
On the rating plate for the ServoOne CM-P Supply Unit BG1+2 you will nd the serial
number. You can identify the date of manufacture based on the following key.
Mac Adr.:
SW:
FS SW1:
SN:
SN:
FS SW2:
Industrial Automation
Germany GmbH
35633 Lahnau
Gewerbestraße 5-9
Multiple rated equipment. See instruction manual
In:
Out:
Year:
T1
T
A
SO CM-P.0010.0000.0
JJWWSXXXX
230 V AC - 480 V AC
2020
46 A AC - 38 A AC
325 V DC - 678 V DC
39 A DC - 32 A DC
JJWWSXXXXt
MACADR
V 0.1
SO CM-P.0010.0000.0
Serial no. key:
- JJ (YY) = Prod. year
- WW = Calendar week (CW)
- S = Production site
- XXXX = Sequential no. per CW
A: Revision state, e.g. F
Figure 1.1 Hardware rating plate ServoOne CM-P Supply Unit (example)

Keba ServoOne CM-P BG1 Specifications

General

Brand	Keba
Model	ServoOne CM-P BG1
Category	Power Supply
Language	English