101
Front position light removes
There are two screws inside the cap.
Please disassemble first then push the cap upward.
You could replace the electrical bulb
Turn around the cap, you could see the connector.
Turn the seat to replace the
electrical bulb
.
TAILLIGHT
The taillight combines a position and a rear brake light.
Normally, when users switch the key to “ON” position, the front
& rear position lights are always keep the light slightly.
Until a brake handlebar is depressed, the rear position light
become more light
Rear Brake lights remove
On the back of the brake light, you could see the cap.
There are two screws to fix this cap, loosen them can
open the cap.
Please rotate the electrical bulb, and then it could be removed
Front position lights
To Next Page
Loading...