104
14.9 Electrical starter switch
With main switch ‘ON’, press electrical starter switch
“ ”
, the engine will start.
Release the button after the engine has started. To avoid engine damage, do not
engage starter with engine running.
Turn signal switch
Turn signal lights are used when turning left or right, or used to change lanes.
Switch to’ ‘, the left turn signal and indicator will be flashing; Switch to’ ‘, the
right turn signal and indicator will be flashing. Switch to middle position turn indicators off
Please make sure use turn signal while turning or changing lanes. It cannot stop
automatically, back it to original position after using.
Light switches
‘The position light, instrument lights and PLATEBOARD LIGHT taillight comes on..
.
“OFF”
The position light, headlight, instrument lights and taillight turn off.
’ High beam switch ’ Low beam switch
“PASS SWITCH”
Press the button, High light comes on
“Hazard warning”
Press the button, the turn signal and indicator will be flashing
Horn switch
Press the horn button, the horn will sound
“Engine stop switch” the engine starts the engine to shut down
To Next Page
Loading...