73
One way clutch Installation
Install the components in the reverse procedures
of removal.
Caution
Torque value: 1.0~1.4kgf-m
Install starting driven gear.
9-8 Flywheel Installation
Align the key on crankshaft with the flywheel
groove, and then install the flywheel
Hold the flywheel by drive face with universal
holder, and tighten flywheel nut.
Torque value: 5.0~6.0kgf-m
Special tool:
Universal Holder
Tape a tightening tape onto the thread of
hexagon bolt.
To Next Page
Loading...
