IEEE-488 Reference
5-54
5.10.11
*SAV save
To save the current setup configuration in memory.
*SAV <NRf>
<NRf> = 0 to 9 Memory location
The Model 7001 can store up to 10 setup configurations at memory locations 0 to 9 by using the
*SAV command. For example, to store the current setup configuration at memory location 6,
send the following command:
*SAV 6
Table 5-5 lists the setup items (along with the bus commands to program them), that can be
saved by the *SAV command. The *RCL command is used to return the instrument to a saved
setup.
OUTPUT 707; “*SAV 6” ! Store setup at memory location 6.
Purpose
Format
Parameters
Description
Programming
example
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com
To Next Page
Loading...
