1
General Information
1-1
1.1 Introduction
This section contains general information about the
Model 7001 Switch System.
1.2 Features
1.3 Warranty Information
1.4 Manual Addenda
1.5 Safety Symbols and Terms
1.6 SpeciÞcations
1.7 Inspection
1.8 Optional Accessories
1.2 Features
Some important Model 7001 features include:
¥ High Density Switching
Up to 80 channels per
mainframe using two switching cards.
¥ Switching Cards
In addition to the switching
cards designed speciÞcally for the Model 7001 (i.e.
Models 7011, 7012 and 7013), you can use the
switching cards that were originally designed for
the Keithley Models 705 and 706 scanners.
¥ Analog Backplane
Can be used to internally
connect the rows or banks of a Model 701X series
card installed in one slot to the rows or banks of a
second Model 701X series card installed in the oth-
er slot.
¥ Close/Open or Scan
The Model 7001 can simply
close and/or open one or more channels, or scan
through a speciÞed list of channels.
¥ Channel Status Display
The real-time status dis-
play monitors the state (closed or open) of all avail-
able channels.
¥ Memory
Up to 100 channel patterns (pattern of
open and closed channels) and 10 customized in-
strument setups can be saved in memory for later
recall.
¥ IEEE-488 Bus
Bus operation conforms to the
IEEE-488.2 and SCPI standards.
¥ Trigger Link
New trigger concept to provide
more versatile and precise external triggering. This
is in addition to the standard in/out BNC external
triggering technique.
1.3 Warranty information
Warranty information is located on the inside front
cover of this instruction manual. Should your Model
7001 require warranty service, contact the Keithley rep-
resentative or authorized repair facility in your area for
further information. When returning the instrument
for repair, be sure to Þll out and include the service
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com
To Next Page
Loading...
Need help?
General
