Keithley 7001

IEEE-488 Conformance Information
E-2
(8) Syntax restric-
tions.
Contained in para-
graph 5.10 (SCPI
Command Sub-
systems).
(9) Response syntax
for every query
command.
Contained in para-
graphs 5.9 (Com-
mon Commands)
and 5.10 (SCPI
Command Sub-
systems).
(10) Device-to-device
message transfer
that does not fol-
low rules of the
standard.
None.
(11) Block data
response size.
None.
(12) Common Com-
mands imple-
mented by 7001.
See Appendix A
(13) Calibration query
information.
Not applicable.
(14) Trigger macro for
*DDT.
Not applicable.
(15) Macro informa-
tion.
Not applicable.
(16) Response to *IDN
(identiÞcation).
See paragraph
5.9.5.
Table E-1 (continued)
IEEE-488 documentation requirements
(17) Storage area for
*PUD and *PUD?
Not applicable.
(18) Resource descrip-
tion for *RDT and
*RDT?
Not applicable.
(19) Effects of *RST,
*RCL and *SAV.
*RST; see para-
graph 5.9.10,
*RCL; see para-
graph 5.9.9,
*SAV; see para-
graph 5.9.11.
(20) *TST information. See Section 7.
(21) Status register
structure.
See paragraph 5.6.
(22) Sequential or
overlapped com-
mands.
All are sequential
except :INIT and
:INIT:CONT ON
which are sequen-
tial.
(23) Operation com-
plete messages.
*OPC; see para-
graph 5.9.6,
*OPC?; see para-
graph 5.9.7,
*WAI; see para-
graph 5.9.17.
Table E-1 (continued)
IEEE-488 documentation requirements
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com