How to troubleshoot varying welding performance in Kemppi MasterTig 535ACDC Welding System?
If you experience varying welding performance with your Kemppi Welding System, check that the welding torch is physically intact and the nozzle is clear of any obstructions.
What to check if cooling liquid is not circulating in Kemppi MasterTig 535ACDC Welding System?
If the Kemppi Welding System displays 'Cooling liquid not circulating', check the liquid level in the cooler and inspect hoses and connectors for any blockages.
What to do if the cooling liquid overheats in my Kemppi MasterTig 535ACDC Welding System?
If the Kemppi Welding System displays 'Cooling liquid overheated', do not turn off the cooler. Allow the liquid to circulate until the fans cool it down. If the fans are not running, no answer.
General| Welding Processes | TIG, MMA |
|---|---|
| AC Frequency | 20 - 250 Hz |
| Power Supply | 3-phase |
| Rated Input Current | 32 A |
| Protection Class | IP23 |
| Input Voltage | 400 V |
| TIG Welding Process | AC/DC |
| Cooling Type | Air |
| Open Circuit Voltage | 70 V |
Detailed description of the MasterTig 535ACDC welding equipment and its components.
Explains how to identify the equipment using serial number and QR code.
Instructions for authorized electricians to install the mains cable and plug correctly.
Steps for authorized personnel to install the optional MasterTig Cooler MXL.
Guide to mounting the welding equipment and optional cooler onto a transport cart.
Instructions for connecting gas-cooled and water-cooled TIG torches to the power source.
Procedures for safely connecting the earth return cable and clamp to the workpiece.
Steps to connect the MMA electrode holder and earth return cable for MMA welding.
Guide to installing wireless and wired remote controls for operation.
Instructions for installing and connecting gas bottles for TIG welding.
Steps to securely mount a gas bottle onto the welding equipment cart.
Detailed instructions for removing and installing the MasterTig control panel.
Safety guidelines and procedures for lifting the welding equipment using a hoist.
Procedures for lifting the welding equipment when it is mounted on a cart.
Steps to turn on the MasterTig welding power source and initiate startup.
Overview of the MTP35X control panel, its controls, and navigation.
Description of the default Home view on the control panel and its displayed information.
Guide to using the Weld Assist utility for simplified welding parameter selection.
Explains how to use memory channels to store and recall welding parameter settings.
Details on adjusting parameters for start and stop sequences in welding.
Guide to adjusting pulse parameters for advanced welding control.
Information on selecting and adjusting current modes like AC, DC, and MIX.
How to access and modify various system settings for the welding machine.
Accessing equipment usage data, software versions, and error logs.
Instructions for changing the screen saver image on the control panel.
Steps to operate the MasterTig Cooler MXL, including filling and circulation.
Usage instructions for hand and foot pedal remote controls for welding adjustments.
General guidance and common issues for diagnosing and resolving welding system problems.
List of error codes, their possible reasons, and proposed actions for the welding system.
Environmental guidelines for the proper disposal of electrical equipment.
Detailed technical specifications for the MasterTig 535ACDC welding power source.
Technical specifications for the optional MasterTig Cooler MXL cooling unit.
General guidance tables for TIG welding parameters (AC/DC) with electrodes and gas.
Explanations of various welding processes and features supported by the machine.
Information on how to order accessories, torches, and remote controls.
To Next Page