EasyManua.ls Logo

Kenmore 19110 - Computerized Sewing Machine - Thread Tension Balancing

Kenmore 19110 - Computerized Sewing Machine
105 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Balancing Thread Tension
Correct tension
_i_ Needle thread (Top thread)
_2_ Bobbin thread (Bottom thread)
_3_ To loosen
_4_To tighten
The ideal straight stitch has threads locked between
two layers of fabric, as illustrated.
If you look at the top and bottom of a seam, notice
that there are no gaps. Each stitch is smooth and even.
When adjusting the needle thread tension, the higher
the number, the tighter the needle thread tension.
Results depend on:
- stiffness and thickness of the fabric
- number of fabric layers
- type of stitch
Tension is too tight
_i_ Needle thread (Top thread)
_2_ Bobbin thread (Bottom
_3_To loosen
_4_ Right side (Top side) of lab
_5_Wrong side (Bottom side)
If the bobbin thread shows
(Top side) of the
turn the dial to
loosen the
[he right
,_ls
Tension is tc
_i_ Needle (Top
_2_ Bobbin
_3_Toti
_4_ Right side
_5_Wrong side ( :fabric
If the needle thread s rough on the wrong side
(Bottom side) of the fabric, and the stitch feels
bumpy, turn the dial to a higher tension setting
number to tighten the needle thread tension.
Adjusting the needle thread tension for a zigzag stitch
For an ideal zigzag stitch, the bobbin thread does not
show on the right side (Top side) of the fabric and
needle thread shows slightly on the wrong side
(Bottom side) of the fabric.
See the illustrations for correct appearance.
To match this appearance, adjust the needle tension.
Correct tension
_i_ Right side (Top side) of fabric
_2_Wrong side (Bottom side) of fabric
Minimize the amount of needle thread visible on the
wrong side (Bottom side) of the fabric without causing
excessive puckering, or causing the bobbin thread to
show on the right side (Top side) of the fabric.
Results vary with fabric, thread and sewing conditions.
Tension is too tight
_i_ Right side (Top side) of fabric
_2_Wrong side (Bottom side) of fabric
The corner of each zigzag pulls together on the right
side of the fabric,
Tension is too loose
_i_Right side (Top side) of fabric
_2_Wrong side (Bottom side) of fabric
The corner of each zigzag point pulls together on the
wrong side of the fabric,
\
f
J
J

Table of Contents

Related product manuals