[sJ Depress the foot control to sew a buttonhole.
The machine will sew a buttonhole in the following
order:
(1) Step 1 and 2: Front bartack and left row
@ Starting point
(2) Step 3: Right row
(3) Step 4: Back bartack and locking stitches at the
end
_i_ End point
(4) LED shows each sewing step and a dot will blink
when the buttonhole is finished.
@ Dot
f
(1)
(2)
[
--@
!
the foot. ........
You can sew another layer of the buttonhole over the
previous stitching (see page 52).
[urol
[61Remove the fabric and place a pin just before the
bartack at each end to prevent cutting bartacks.
Cut the opening with the seam ripper. Use an awl
to open the keyhole buttonhole.
@ Pin
@ Seam ripper
_ Awl
[1161 oe o7 08
DO 8
[171After the buttonhole sewing is finished, push the
buttonhole lever upward as far as it will go.
@ Buttonhole lever
@
x j
To Next Page
Loading...
