Adjusting Pattern Balance
If the decorative stitch patterns, letters or numbers are
uneven when you sew on a particular fabric, adjust them
with the feed balancing dial.
Feed balancing dial
Standard setting mark
Indication line
* The machine comes with the feed balancing dial set in
the position as shown.
Adjusting Distorted Stretch Stitch Patterns
If the patterns are uneven when sewing with a particular
fabric, adjust them by turning the feed balancing dial with a
coin.
When patterns are too compressed, correct by turning the
dial in the direction of "+".
When patterns are too drawn out, correct by turning the
dial in the direction of"-".
Adjusting Distorted Letters or Numbers
If the letters are uneven when sewn on a particular fabric,
select pattern 8 to test the stitch then turn the feed
balancing dial with a coin.
When the letters or numbers overlap, turn the dial in the
direction of "+".
When the letters or numbers are too drawn out, turn the
dial in the direction of"-".
94
To Next Page
Loading...
Need help?
General
