Stretch buttonhole
Stitch pattern:
Thread tension dial:
(_ Presser foot R:
(_) Starting point
(_ Bartacking
* Sewing procedure is the same as automatic buttonhole.
15
1 to5
Automatic buttonhole foot
I B 5.0 1.0
Knit buttonhole
Stitch pattern:
Thread tension dial:
(_ Presser foot R:
(_) Starting point
(_ Bartacking
* Sewing procedure is the same as automatic buttonhole.
16
1 to5
Automatic buttonhole foot
=-i
• B.O 1.0
Adjusting the stitch width and density in
rounded, keyhole, stretch and knit buttonholes
• To change the stitch density
The adjustment of the stitch density is between 0.2 to
0.8, the same as automatic buttonhole (refer to page 64).
• Adjustment of the stitch width on rounded end
buttonhole
When you press the zigzag width key, the pre-set
buttonhole width is set for the rounded buttonhole at
4.0. Press "+" or "-" to adjust the stitch width of the entire
buttonhole between 2.5 to 5.5.
Width: 2.5
Width: 4.0
Width: 5.5
• Adjustment of the stitch width on keyhole buttonhole
When you press the zigzag width key, the pre-set
buttonhole width is set for the keyhole buttonhole at 7.0.
Press "+" or "-" to adjust the stitch width of the entire
buttonhole between 5.5 to 7.0.
Width: 5.5
(_) Width: 6.0
Width: 7.0
• Adjustment of the stitch width on stretch and knit
buttonhole
When you press the zigzag width key, the pre-set
buttonhole width is 7.0.
Press "+" or "-" to adjust the stitch width of the entire
buttonhole between 2.5 to 7.0.
WIDTH
??.........................
WIDTH
66
To Next Page
Loading...
