Kenmore 19233 - Computerized Drop-In Bobbin Sewing Machine - Button Sewing

Button sewing
Stitch pattern:
Needle thread tension:
(_ Presser foot F:
(_ Feed dog:
04
3to7
Satin stitch foot
Dropped
I
O4
®
t
-- []
5.0 2.0
Match the buttonholes to the horizontal slot on the
presser foot.
Lower the foot to hold the button in place.
Turn the handwheel by hand until the needle point is just
above the button.
Press the stitch width button (+ or -) so the needle will
enter the left hole of the button.
Turn the handwheel so that the needle will enter the right
hole of the button. Readjust the stitch width if necessary.
J
Stitch several times.
After you finish sewing, cut the thread but leave 3" to 4"
of thread at the button.
With a hand sewing needle, draw the top thread to the
reverse side of the fabric and knot the threads.
*After the button sewing is completed, raise the
feed dogs for normal sewing.
A
%%%
J
58