Keysight Technologies 34420A User Manual

Quick Start 1
Keysight 34420A Service Guide 31
To Make Input Connections
Using the Cable Provided
Align the front panel connector and cable conductors, press in.Tighten coupling
nut.
NOTE
The connector and cable are an integral part of the measurement system. For
the highest accuracy, use the copper cable and connectors supplied by Keysight
Technologies.
The conductors may require occasional cleaning to remove oxides. Cleaning the
conductors is described on page 137.
WARNING
The connector body and cable shield are connected to earth ground.

Keysight Technologies 34420A Specifications

General

Brand	Keysight Technologies
Model	34420A
Category	Measuring Instruments
Language	English