Keysight Technologies 34420A User Manual

2 Front-Panel Operation
60 Keysight 34420A Service Guide
To Select an Input Channel
For voltage measurements, you have two independent input channels.
–Pressing toggles the display between Channel 1 and Channel 2.
– Pressing (Scan) creates an alternating Channel 1 and Channel 2
display. Press again to cancel.
Channel
Shift
Channel
Channel
NOTE
Scan mode alternates between input channels every 3 seconds or every
measurement, whichever is longer. If you are using the scan mode, turn off all
the input filters (both digital and analog).

Keysight Technologies 34420A Specifications

General

Brand	Keysight Technologies
Model	34420A
Category	Measuring Instruments
Language	English