Front-Panel Operation 2
Keysight 34420A Service Guide 51
A Front-Panel Menu Tutorial
This section is a step-by-step tutorial which shows how to use the front-panel
menu. We recommend that you spend a few minutes with this tutorial to get
comfortable with the structure and operation of the menu.
The menu is organized in a top-down tree structure with three levels (menus,
commands, and parameters). You move down or up the menu tree to
get from one level to the next. Each of the three levels has several horizontal
choices which you can view by moving left or right .
–To turn on the menu, press
(Menu On/Off).
–To turn off the menu, press
(Menu On/Off), or press any of the
function or math keys on the top row of front-panel keys.
–To execute a menu command, press .
–To recall the last menu command that was executed, press
(Menu
Recall).
–To turn off the menu at any time without saving changes, press any function
key
If you become confused or get lost at any point during the tutorial, simply turn
off the menu and start over again with step 1 for that example.
To Next Page
Loading...
