Keysight Technologies 34420A User Manual

Calibration Procedures 3
Keysight 34420A Service Guide 97
Aborting a Calibration in Progress
Sometimes it may be necessary to abort a calibration after the procedure has
already been initiated. You can abort a calibration at any time by pressing any
front-panel key (except ). When performing a calibration from the remote
interface, you can abort a calibration by issuing a remote interface device clear
message or by pressing the front-panel LOCAL key.
Shift

Keysight Technologies 34420A Specifications

General

Brand	Keysight Technologies
Model	34420A
Category	Measuring Instruments
Language	English