Front-Panel Operation 2
Keysight 34420A Service Guide 55
7 Save the change and turn off the menu.
The meter beeps and displays a message to show that the change is now in
effect. You are then exited from the menu. The meter will no longer show
commas in the display.
Menu Example 2
The following exercise demonstrates how to use the menu recall feature as a
shortcut to set the COMMA command back to its original setting. You must
perform the steps in Menu Example 1 before you start this example.
1 Use menu recall to return to the COMMA command.
This returns you to the COMMA command, which was the last command used
before you exited the menu in the Example 1.
2 Move down to the COMMA parameter choices.
The first parameter choice is OFF (the current setting from Example 1).
To Next Page
Loading...
