Keysight Technologies 34420A User Manual

3 Calibration Procedures
76 Keysight 34420A Service Guide
perform the adjustment by first selecting the required setup. The calibration value
is sent to the meter and then the calibration is initiated over the remote interface.
The meter must be unsecured prior to initiating the calibration procedure. For
further information on programming the meter, see Chapter 4 in the Keysight
34420A User's Guide.

Keysight Technologies 34420A Specifications

General

Brand	Keysight Technologies
Model	34420A
Category	Measuring Instruments
Language	English