Keysight N5221A/22A Service Guide 3-3
Tests and Adjustments
Information in This Chapter
Adjustments
b
Setups and procedures for adjusting your analyzer:
— 10 MHz Frequency Reference Adjustment
— Synthesizer Bandwidth Adjustment
— Source Adjustment
— IF Gain Adjustment
— Receiver Characterization
— Receiver Adjustment
— EE Default Adjustment
— IF Response Adjustment (Option 090, 093, or 094 Only)
page 3-41
a. These performance tests are included in the analyzer’s firmware for Options 897 and 898.
b. These adjustments are included in the analyzer’s firmware on all models and options.
Section Title Summary of Content Start Page
To Next Page