Installation and Service Guide N5250-90001 2-3
System Description
N5250C Network Analyzer System
PNA Series Microwave Network Analyzer System
N5250A
What’s Included in the N5250C System?
The N5250C system includes the following:
• PNA Series network analyzer, E8361C with Option H11 (includes options UNL, 014, 080, and 081)
• N5260A millimeter head controller (which includes the following):
• Left and right millimeter-wave
test head modules (one of the following):
— N5250C-700 (Standard) millimeter-wave test head modules without bias-tees (left test head
— N5250C-017 (Option 017) millimeter-wave test head modules with bias-tees (left test head has an
attenuator)
— N5250C-018 (Option 018) millimeter-wave test head mod
ules with bias-tees (left and right test
heads each have an attenuator)
• Interconnection cables and adapters to interconnect the
system components
Partial Systems
If you already have the E8361C network analyzer
with Option H11, you can order the N5260A millimeter
head controller (with millimeter-wave test head modules and cables) to make a complete system:
• N5260A millimeter head controller (which includes the following):
• Left and right millimeter-wa
ve test head modules (one of the following):
— N5260A-110 millimeter-wave test head modules without bias-tees (left test head has an
attenuator). (Same as included in N5250C-700.)
— N5260A-120 millimeter-wave test head modules with bias-tees (left test head has an attenuator).
(Same as included in N5250C-017.)
— N5260A-130 millimeter-wave test
head modules with bias-tees (left and right test heads each
have an attenuator). (Same as included in N5250C-018.)
• Interconnection cable
s and adapters to interconnect the system
components
has an attenuator)
To Next Page
Loading...
Need help?
General
