Keysight Technologies N8241A - Page 57

58 Chapter 2
Basic Operation
Using Programmatic Interfaces
disp(errorMsg);
disp('proram stopped');
return
else
disp('ok');
end
disp('Transfering the waveform to the instrument');
[waveformHandle, errorN, errorMsg] =
agt_awg_storewaveform(instrumentHandle1, waveform);
if errorN ~= 0
disp(errorN);
disp(errorMsg);
disp('program stopped');
return
else
disp('ok');
end
[waveformHandle, errorN, errorMsg] =
agt_awg_storewaveform(instrumentHandle2, waveform);
if errorN ~= 0
disp(errorN);
disp(errorMsg);
disp('program stopped');
return
else
disp('ok');
end
disp('Initiating playback of the waveform on the