Chapter 1 19
Introducing the N8241/2A AWGs
Front Panel Interface
Status Indicators
PWR
The power indicator has the following states:
LAN
The LAN indicator has the following states:
State Power Status Illumination
OFF No Power None
STANDBY Standby Power Solid Amber
ON Power is on Solid Green
State LAN Status Illumination
ON Normal Operation Solid Green
ON Device Identity:
–Needs initialization, refer to
“Initializing the LAN
Configuration” on page 93
Blinking Green
OFF LAN Error/Fault:
–No valid or duplicate IPaddress
–Unable to renew previously
obtained DHCP lease
–Disconnected LAN cable
Solid Red
OFF This is the state when:
–The system is initializing
or
–A LAN reset has been initialized
None
To Next Page
Loading...
Need help?
General
