4
WARNING This is a Safety Class 1 Product (provided with a protective earthing ground
incorporated in the power cord). The mains plug shall only be inserted in a
socket outlet provided with a protected earth contact. Any interruption of the
protective conductor inside or outside of the product is likely to make the
product dangerous. Intentional interruption is prohibited.
CAUTION This product is designed for use in Installation Category II and Pollution Degree 2
per IEC 61010 Second Edition and 664 respectively.
WARNING If this product is not used as specified, the protection provided by the
equipment could be impaired. This product must be used in a normal condition
(in which all means for protection are intact) only.
WARNING No operator serviceable parts inside. Refer servicing to qualified personnel. to
prevent electrical shock do not remove covers.
CAUTION The Mains wiring and connectors shall be compatible with the connector used in the
premise electrical system. Failure to ensure adequate earth grounding by not using
the correct components may cause product damage, and serious injury.
Safety Symbols
The following symbols on the instrument and in the manual indicate precautions
which must be taken to maintain safe operation of the instrument.
The Instruction Documentation Symbol. The product is
marked with this symbol when it is necessary for the
user to refer to the instructions in the supplied
documentation.
This symbol indicates the position of the operating
switch for ‘On’ mode
To Next Page
Loading...
Need help?
General
