5
This symbol indicates the position of the operating
switch for ‘Stand-by’ mode. Note, the instrument is
NOT isolated from the mains when the switch is in this
position.
To isolate the instrument, the mains coupler (mains
input cord) should be removed from the power supply.
This symbol indicates separate collection for electrical
and electronic equipment, mandated under EU law as of
August 13, 2005. All electric and electronic equipment
are required to be separated from normal waste for
disposal (Reference WEEE Directive, 200/96/EC).
The CE mark shows that the product complies with all
relevant European Legal Directives.
The C-Tick mark is a registered trademark of the
Australian Communications Authority. This signifies
compliance with the Australian EMC Framework
Regulations under the terms of the Radio
communications Act of 1992.
ISM 1-A This is a symbol of an Industrial, Scientific, and
Medical Group 1 Class A product.
ICES/NMB-001 This ISM device complies with Canadian ICES-001.
Cet appareil ISM est conforme à la norme NMB-001 du
Canada.
The CSA mark is a registered trademark of the
Canadian Standards Association, and indicates
compliance to the standards laid out by them.
To Next Page
Loading...
Need help?
General
