*TST? Self-test query.
*WAI Pauses additional command processing until all pending operations are complete.
INITiate
[:IMMediate]
:ACQuire Initiates the measurement trigger system.
:ELOG Initiates external data logging.
:TRANsient Initiates the transient trigger system.
:CONTinuous
:TRANsient 0|OFF|1|ON Continuously initiates the transient trigger system.
INSTrument
:GROup
:FUNCtion MASTer|NONE|SLAVe Set the master/slave function
:MASTer
:CONNect
[:STATe] 0|OFF|1|ON Connects the master to previously discovered slave units
:DELay <delay> Specifies an auto-connect delay after power-on
:MODE AUTO|MANual Automatic connect at power-on or by command
:DISCover Discovers bus or LAN connected slave units
:RESet Reset the master configuration
:SLAVe
:ADDRess <bus address> Sets the slave bus address
LXI
:IDENtify
[:STATe] 0|OFF|1|ON Turns the front panel LXI identify indicator on or off.
:MDNS
[:STATe] 0|OFF|1|ON Sets the MDNS state
MEASure
[:SCALar]
:CURRent
[:DC]? Takes a measurement; returns the averaged current.
:ACDC? Takes a measurement; returns the RMS current (AC + DC).
:HIGH? Takes a measurement; returns the High level of a current pulse.
:LOW? Takes a measurement; returns the Low level of a current pulse.
:MAXimum? Takes a measurement; returns the maximum current.
:MINimum? Takes a measurement; returns the minimum current.
:POWer
[:DC]? Takes a measurement; returns the averaged power.
:MAXimum? Takes a measurement; returns the maximum power.
:MINimum? Takes a measurement; returns the minimum power.
:VOLTage
1 Quick Reference
26 Keysight RP7900 Series Operating and Service Guide
To Next Page
Loading...
Need help?
General
