5 Triggering and Gating
126 Keysight 53210A User’s Guide
Trigger and Gate Cycle
The elements of triggering and gating summarized in Figure 5-1 are shown in
detail in the programming cycle of Figure 5-2. The following sections contain
descriptions and examples of each step in the cycle.
The SCPI commands and parameters listed throughout this chapter are provided
as a guide to how the counter is operated programmatically. The commands are
described in detail in the ‘Programmer’s Reference’ section of the Keysight
53210A/53220A/53230A Product Reference CD.
To Next Page
Loading...
