3 53210A Measurements
94 Keysight 53210A User’s Guide
Frequency Measurements
Frequency
A standard frequency measurement is shown in Figure 3-1.
Figure 3-1 Standard Frequency Measurement.
The SCPI commands listed in these examples are provided as an introduction to
how frequency measurements are made. Commands may be included even
though they specify default values - but which should be considered when
modifying the examples for actual use. Refer to the “Programmer’s Reference”
on the Keysight 53210A/53220A/53230A Product Reference CD for additional
information.
To Next Page
Loading...
