2 53210A Software Installation and Interface Configuration
50 Keysight 53210A User’s Guide
Software Requirements
The environments available to program the 53210A are dependent upon the IO
libraries and drivers installed. The IO software included with the 53210A is
contained on the following CD:
– Keysight Automation-Ready CD: Keysight IO Libraries Suite
The IVI-C and IVI-COM drivers for the instrument can be found on the web at:
www.keysight.com/find/53210A
Table 2-1 summarizes the environments, IO driver recommendations, and the
location (media) where specific drivers and libraries can be found.
Table 2-1 53210A Development Environments and Drivers.
Interface Development Environment IO Driver Recommendations
LAN
Web-enabled instrument interface
> SCPI Command Interface window
Java™ -enabled Web browser
(available from www.java.com)
LAN, GPIB, USB
Keysight Connection Expert
> Interactive IO window
Keysight IO Libraries CD
[a]
[a] Visit www.keysight.com for the latest version of the Keysight IO Libraries Suite.
LAN, GPIB, USB
Microsoft® Visual Studio®
> Visual C++
VISA - Keysight IO Libraries CD
[a]
IVI-C - Web
LAN, GPIB, USB
Microsoft® Visual Studio®
> Visual Basic
VISA-COM - Keysight IO Libraries
[a]
IVI-COM - Web
LAN, GPIB, USB
Microsoft® Visual Studio® .NET
> C#, C++, Visual Basic
IVI-COM - Web
LAN, GPIB, USB Keysight VEE IVI-COM - Web
LAN, GPIB, USB National Instruments LabVIEW™
53210A native mode driver
IVI-C - Web
LAN, GPIB, USB National Instruments LabWindows/CVI IVI-C - Web
To Next Page
Loading...
