Keysight 53210A - Figure 2-10 Specifying the Address or Host Name

2 53210A Software Installation and Interface Configuration
76 Keysight 53210A User’s Guide
Figure 2-10 Specifying the Address or Host Name.
The firmware update takes a few moments to complete. The 53210A will
reboot once the update is complete.
NOTE
Following a firmware update, Keysight Connection Expert (if running) may report
that the 53210A configuration has changed. This is represented by a yellow
triangle and an exclamation point (!) next to the updated instrument. Select the
instrument name, select ‘Change Properties’, and then select either ‘Test
Connection’ or ‘Identify Instrument’ to update Connection Expert.