53210A Software Installation and Interface Configuration 2
Keysight 53210A User’s Guide 53
Web Interface Overview
The following information is an introduction to the counter’s Web interface.
The counter welcome page (Figure 2-1) displays IO information, can be used to
identify a connected instrument, and contains menu tabs for accessing additional
counter functionality.
To easily identify the counter among other instruments using its Web interface
home page, clicking on:
Turn On Front Panel Identification Indicator
changes the counter display to “LXI Web Identify” until the indicator is turned off
by clicking on:
Turn Off Front Panel Identification Indicator
Programming the Counter
Selecting the ‘Remote Control’ icon (second from top) on the welcome page
opens the Interactive IO window shown in Figure 2-2. From this window, SCPI
commands can be sent to the instrument.
For ease in (Internet) browser navigation when controlling multiple instruments,
open a separate browser session for each Web-enabled instrument.
Although no additional libraries or drivers are required to use the Web interface,
the interface is also accessible from Keysight Connection Expert (KCE). See
“Opening the Web Interface from Keysight Connection Expert” for more
information.
To Next Page
Loading...
