Keysight 53210A - Page 131

Triggering and Gating 5
Keysight 53210A User’s Guide 131
Trigger Slope Example
//configure for frequency, set system trigger parameters
CONF:FREQ 5E6,0.1,(@2)
TRIG:SOUR EXT // trigger source external
TRIG:SLOP POS // trigger slope - positive
System Trigger Delay
The delay between receipt of the internal or external system trigger signal and the
start of the first measurement (Figure 5-2) is set with the command:
TRIGger:DELay {<time>|MINimum|MAXimum|DEFault}
TRIGger:DELay? [{MINimum|MAXimum|DEFault}] (query form)
– specifies the delay in seconds. CONFigure and MEASure set a defaut delay of
0.0s.
Trigger Delay Example
//configure for frequency, set system trigger parameters
CONF:FREQ 5E6,0.1,(@2)
TRIG:SOUR EXT // trigger source external
TRIG:SLOP POS // external trigger slope - positive
TRIG:DEL 1 // 1s delay after trigger received